2-in-1 Drain Stopper & Strainer

Use the 2-in-1 Drain Stopper and Strainer to keep hair and debris out of the drain! Want to fill your tub? It can be converted into a stopper with the push of a button!

How to use:

1. Place the stopper over your drain, dome side up.

2. Press the dome down flat.
3. To use as a drain stopper, press the upturned edges of the smaller ring down. This will prevent water from going down the drain.

To catch hair and debris, make sure the smaller ring is turned up, and press down the middle button. Water will pass through.

Tips:

- If your stopper is not sealed it is possible that the drain cover has been squeezed and deformed. Pour hot water around it to restore its original shape.

- Fits 1.4" (3.6cm) Bathtub Drain Hole

- If the drain hole is smaller than the stopper, pinch the bottom plug to change the shape until it fits. If the drain hole is bigger, press the center with more power when using to catch hair and debris.